[:it]Prana MT 100 Power Amplifier, 80 MHz – 1000 MHz, 100W[:]

[:it]

• Frequency bandwidth : 80 MHz – 1000 MHz
• Typical output power : 100 W
• Power at 3 dB compression : 120 W min. up to 450 MHz / 80 W min. from 450 MHz to 1000 MHz
• Power at 1 dB compression : 100 W min. up to 450 MHz / 65 W min. from 450 MHz to 1000 MHz
• Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression limit
• Class type : Class A
• Gain : 48 dB
• Linear power gain flatness : ± 3 dB max
• Mismatch tolerance : infinite without damage
• Input impedance : 50 ohms / VSWR: 2:1max
• Output impedance : 50 ohms / VSWR: 2:1max
• Input power : +10 dBm max.
• RF input connector : Type N fem. (front or rear panel) – other connector type on request
• RF output connector : Type N fem. (front or rear panel) – other connector type on request
• Ambient operating temperature : 0 °C / + 35 °C
• Room temperature storage : -20 °C / +70 °C
• Cooling : Forced air: 60 l/sec max. (self contained fans)
• Power voltage : 90-250 VAC, 47-63 Hz, single phase
• Rated current : 6.4 A at 110 VAC / 3 A at 230 VAC
• Dimensions : 640 x 450 x 178 mm (4U) / 25.2 x 17.7 x 7 in (4U)
• Weight : 32 kg / 70 lb

MT 100 D version :

• Safety interlock : Connector type BNC
• Digital control : Transistors, power supplies and internal temperature
• Communication interface : IEEE 488
• 4 lines digital display : Status, faults, (direct and reverse instantaneous power for DC version)

MT 100 SC and MT 100 DC versions :

• Integrated bidirectional power coupler : Coupling factor 50 dB typ. (SC version) / 59 dB typ. (DC version)
• Power coupling connector : Type N fem. (front or rear panel)
• Estimated output power losses due to the coupler : 0.3 dB

[:]