[:it]Prana GN 1000 Power Amplifier, 100 kHz – 200 MHz, 1000W[:]

[:it]

• Frequency bandwidth : 100 kHz – 200 MHz (Frequency extension between 80 kHz to 250 MHz upon request)
• Typical output power : 1000 W
• Power at 3 dB compression : 1100 W min. up to 100 MHz / 600 W min. from 100 MHz to 200 MHz
• Power at 1 dB compression : 900 W min. up to 100 MHz / 400 W min. from 100 MHz to 200 MHz
• Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression limit
• Class type : Class A
• Gain : 63 dB
• Linear power gain flatness : ± 3 dB max
• Mismatch tolerance : infinite without damage
• Input impedance : 50 ohms / VSWR: 2:1max
• Output impedance : 50 ohms / VSWR: 2:1max
• Input power : +10 dBm max.
• RF input connector : Type N fem. (front or rear panel) – other connector type on request
• RF output connector : Type N fem. (front or rear panel) – other connector type on request
• Safety interlock : Connector type BNC
• Digital control : Transistors, power supplies and internal temperature
• Communication interface : IEEE 488, RS232
• 4 lines digital display : Status, faults, (direct and reverse instantaneous power for DC version)
• Ambient operating temperature : 0 °C / + 35 °C
• Room temperature storage : -20 °C / +70 °C
• Cooling : Forced air: 240 l/sec max. (self contained fans)
• Power voltage : 200-250 VAC, 47-63 Hz, single phase
• Rated current : 15.2 A at 230 VAC
• Dimensions : 640 x 450 x 360 mm (8U) / 25.2 x 17.7 x 14.2 in (8U)
• Weight : 54 kg / 119 lb

GN 1000 DC version :

• Integrated bidirectional power coupler : Coupling factor 59 dB typ.
• Power coupling connector : Type N fem. (rear panel)
• Estimated output power losses due to the coupler : 0.3 dB

[:]