Prana N-DT 90 Amplificatore di Potenza, 9 kHz – 1000 MHz / 90 W CW


  • Class A solid state
  • Broadband (instantaneous single band): 9 kHz – 1000 MHz
  • Frequency extension between 4 kHz and 9 kHz upon request
  • Typical output power : 90 W CW
  • Linear output power (1 dB compression) guaranted with harmonics <-20 dBc:
    • P1dB > 50 W and H<-20 dBc up to 500 MHz and
    • P1dB > 30 W and H<-20 dBc from 500 MHz to 1000 MHz
  • Air cooling: self contained fans
  • Can operate in full mismatch conditions without damage
  • Reliable, efficient and robust
  • 19″ Rack
  • 3 years standard warranty

Prana N-DT 90 Amplificatore di Potenza, 9 kHz - 1000 MHz / 90 W CW
Prana N-DT 90 Amplificatore di Potenza DatasheetPrana N-DT 90 Amplificatore di Potenza Datasheet Inglese
Richiedi Informazioni
  • Frequency bandwidth : 9 kHz – 1000 MHz
  • Typical output power : 90 W
  • Power at 3 dB compression : 60 W min up to 500 MHz / 40 W min from 500 MHz to 1000 MHz
  • Power at 1 dB compression : 50 W min up to 500 MHz / 30 W min from 500 MHz to 1000 MHz
  • Harmonics distortion : H2,H3 < -20 dBc for the output power at 1 dB compression limit
  • Class type : Class A
  • Gain : 48 dB
  • Linear power gain flatness : ± 5 dB max
  • Mismatch tolerance : infinite without damage
  • Input impedance : 50 ohms / VSWR: 2:1max
  • Output impedance : 50 ohms / VSWR: 2:1max
  • Input power : +10 dBm max.
  • RF input connector : Type N fem. (front or rear panel) – other connector type on request
  • RF output connector : Type N fem. (front or rear panel) – other connector type on request
  • Ambient operating temperature : 0 °C / + 35 °C
  • Room temperature storage : -20 °C / +70 °C
  • Cooling : Forced air with fan speed control (for D version): 60 l/sec max. (self contained fans)
  • Power voltage : 90-250 VAC, 47-63 Hz, single phase
  • Rated current : 7.7 A at 110 VAC / 3.7 A at 230 VAC
  • Dimensions : 640 x 450 x 178 mm (4U) / 25.2 x 17.7 x 7 in (4U)
  • Weight : 28 kg / 67 lb